1 7

hairbycaitlynAPPROVED

Device Display Stand

Device Display Stand

$68.00 USD
$68.00 USD
Sale Sold out
Shipping calculated at checkout.

This holder was designed to display your favorite hair treatment devices beautifully in your salon, or at home. I developed this stand as an aesthetic alternative to store your devices in without scratching the ceramic barrels the way traditional metal stands do. 

*Remember to account for the overall height of your devices when in the stand and also consider overhead clearance when inserting and removing devices from the stand. Drawers, cabinets, and shelves are great places to use the hairbycaitlynapproved Device Display Stand, just be sure to set yourself up for success by taking all things into consideration. The measurements listed are JUST for the stand itself and do not take into account the height of the devices. 

    View full details

    Features

    • Four holes that can accommodate devices up to a 1.4" round.
    • One opening to allow for a cord to pass through easily and slide or drop in.
    • Crystal clear premium material designed to go with any aesthetic.
    • A black silicone non-slip pad to keep the irons in place.
    • Can be wall mounted or, countertop mounted.

    Mounting

    • This versatile stand can be wall hung or counter top mounted and includes two types of mounting hardware. 
    • One set of drywall screws and anchors for a fixed position
    • Two pieces of clear, durable, double sided tape that can be used to mount on the wall or counter.
    • The included tape is ONLY suitable for SMOOTH surfaces such as: laminate, epoxy, glass, smooth wood, large format tile/ stone, high gloss surfaces, properly sanded and painted plaster walls. It is NOT recommended for use on textured or uneven surfaces such as: Stucco, brick, small format tiles/stones, reclaimed natural wood grain, embossed wallpaper, textured paint or faux wall finishes.
    • If mounting on a smooth, vertical surface, use both pieces of the included tape applied horizontally on the back of the stand for a secure, long lasting result.
    • TO APPLY THE TAPE: Peel off the white backing and press the tape firmly onto the device stand. Then remove the clear backing and fix into place. Apply firm pressure against the stand for one minute and allow a minimum of 24 hours for the clear tape to cure before any weight is added to the stand.

    DIMENSIONS: 10x3x6.5" 1.7lbs

    Warning

    NEVER LEAVE A DEVICE POWERED ON WHILE BEING STORED IN THIS STAND.

    THIS STAND IS HEAT RESISTANT BUT IT IS NOT HEAT PROOF. IF YOU LEAVE A DEVICE POWERED ON IN THIS STAND SERIOUS DAMAGE MAY OCCUR.

    ONLY USE THE INCLUDED TAPE ON A SMOOTH SURFACE. USING IT ON A ROUGH OR TEXTURED SURFACE MAY RESULT IN SERIOUS DAMAGE. *USE TAPE AT YOUR OWN RISK.

    DIMENSIONS: 10x3x6.5" 1.7lbs

    1 25